Manualshelf

Step by Step Guide

ManualsBrandsAerosoft Sim-Wings ManualsApplicationsAirbus A318 A319 A320 A321 Professional
31323334353637383940
A318/319/320/321
Profesional
Step-By-Step Tutorial
06-01- 31
11. Dezember 2018
TILLER
The Tiller option allows you to de-activate the use of a standard Throttle 3 axis to control the tiller. On some
machines this axis is not available or already in use then set this option to OFF.
AUTO RUDDER
Setting Auto rudder in your P3D settings to ON you also need to set this in the Settings MCDU to ON. It disables
the A318/319/320/321 fly by wire function on the ground. This makes steering the A318/319/320/321 on the
ground possible without using rudder pedals or a joystick with a rudder.
If this function here is set to ON then there will be no “rudder check” during the “After Engine Start” checklist.
4.7 Load / Fuel
Load/Fuel Options
Conditions to use these functions (except LOAD INSTANT) are:
• All Load Requests: Engines = off and parking brakes or chocks are set
• Pax boarding: Front or aft door is open
• Cargo: Both cargo doors are open
Init Loadsheet
Please push LSK6L and the data from the Fuelplanner Loadsheet (see chapter 4.1 for details) are automatically
loaded into the menu – but not into the plane (details you will find in the following paragraph “Load Process”).
But it is also possible to enter the data for PAX, CARGO and FUEL manually (within the limits according to the
model used –) please see table below:
A318
A319
A320
A321
Max. Passengers (Standard)
No.
107
124
150
186
Max. Passengers (Special)
No.
132
156
180
220
Max. Cargo Weight
KG
17.00
17.00
17.00
17.00
Max. Fuel Weight
KG
19.15
19.15
19.15
19.15
Empty Weight
KG
39.50
40.80
41.24
46.85
Max. TOW
KG
68.00
75.50
77.40
89.00
If using the special seat configuration, the pax weight should be adjusted accordingly. The defined weight per
passenger can be changed (SETUP = LSK5R) only in case of manual input – modifications are saved for future
flights. If the Fuelplanner Loadsheet data are used the weight is fixed with 84 kg/pax.
It is also possible to manually modify the CG value. Based on the CG value the cargo is distributed between the
forward and aft cargo bay.