Step by Step Guide

A318/319/320/321

Profesional

Step-By-Step Tutorial

Vol

06-01- 106

11. Dezember 2018

Enabling ALTN DEST – step 1

Enable the alternate destination by pushing LSK 4L.

Enabling ALTN DEST – step 2

Then the following screen opens:

Enabling ALTN DEST – step 3

Go back to the F-Plan and use TMPY INSERT = LSK 6R. The alternate flightplan now becomes the active primary

flightplan.

If at any enroute waypoint of the active flightplan (except FROM) the alternate flightplan is enabled (please see

the picture #98) – the flightplan shrinks to:

• Active route until the revise point = ALMER in our example

• F-PLAN DISCONTINUITY

• Alternate destination = LOWW