Step by Step Guide

A318/319/320/321

Profesional

Step-By-Step Tutorial

Vol

06-01- 105

11. Dezember 2018

Picture 2: Entering ALTN DEST = LOWW

• As we will not use the existing ALTN CO RTE “LOWGLOWW01” please just go back to the INIT A page (

(=RETURN LSK 6L).

Not using existing CO RTE

• The INIT A page then looks as follows

INIT A page with ALTN destination

Now the two flightplans are loaded and can be reviewed on the F-PLAN pages. The primary flightplan is displayed

in “green” whereas the GA waypoints and the alternate flightplan (or just destination) are displayed in “blue.

Both flightplans are separated by ------ END OF F-PLAN -------. The alternate flightplan LOWG to LOWW is also

separated by a -----F-PLAN DISCONTINUITY ------ because no waypoints etc. are yet defined.

If for any reason ATC informs you that the airport in Graz is closed and you receive the ATC-permission to divert

at the revise point of ALMER to LOWW (Vienna) the information will be like “Cleared to divert to LOWW, from

ALMER direct to NERDU and then use transition NER5L for runway 16”. Then do the following: Scroll in the

primary flightplan to the waypoint of ALMER and push the LSK L (in following screenshot = LSK 3L).