Step by Step Guide

A318/319/320/321
Profesional
Step-By-Step Tutorial
Vol
6
06-01- 102
11. Dezember 2018
Entering ALTN destination – step 3
Now the two flightplans are loaded and can be reviewed on the F-PLAN pages. The primary flightplan is displayed
in “green” whereas the GA waypoints and the alternate flightplan are displayed in “blue. Both flightplans are
separated by ------ END OF F-PLAN -------.
If for any reason ATC informs you that the airport in Graz is closed and you receive the ATC-permission to divert
at the revise point of ALMER to LOWW = Vienna. The information could be like “Cleared to divert to LOWW,
from ALMER direct to NERDU and use approach transition NER5L for runway 16”. Then do the following: Scroll
in the primary flightplan to the waypoint of ALMER and push the LSK L (in following screenshot = LSK 3L).
Enabling ALTN DEST – step 1
Enable the alternate destination by pushing LSK 4L.
Enabling ALTN DEST – step 2
Then the following screen opens: