User guide

Page | 8
MRK-D-0022 V3.1 Aeroqual Series 200, 300 & 500 User Guide
Scroll down
Scroll up
Enter
Alarm mute
Power button
2.3. Optional Temperature and Relative Humidity Sensor
If the temperature and relative humidity sensor has been purchased, it can be inserted into the PS/2
connector at the base of the monitor. Ensure monitor is turned off before connecting the sensor.
Note: The monitor will still operate with only the temperature
and RH sensor connected.
3. Operation
The following instructions detail the operation and set up of the monitor:
3.1. Series 200 Display
3.2. Series 300 & 500 Display
Enter
Power button /
Scroll button
USB to Monitor
Cable
Two Way
Adaptor Cable
Temperature &
Relative
Humidity Sensor