User guide

Page | 16
MRK-D-0022 V3.1 Aeroqual Series 200, 300 & 500 User Guide
If for any reason, the data download does not complete, is terminated or stops:
 Turn off the monitor to prevent any data loss. 
 Delete the data that has been downloaded to the PC 
 Close the PC software program and repeat the downloading process with the monitor on,
connected and with the PC software running.

4.2.3. Graphs
While logging directly to a PC, the Real Time View Graph or the Logged Data Graph can be
accessed via the “Data” menu on the menu bar.
Note: If a multi sensor is plugged in each parameter will been shown in individual tabs
1. The graphs can be configured by clicking Data  Graph  Default Style or by right clicking
on the graph and selecting “Graph Style”
2. To zoom in click on the graph and drag
to create a yellow rectangle. The yellow
rectangle shows the selected area the
graph will zoom into.
3. Right click on the graphs to save or print
the graphs
 Graphs will be saved as a JPG file
4. To reset the graph to the default, right
click and select “Reset to Default”
5. The logged data graph can be viewed be
clicking Data  Graph  Logged Data
Note 1: In the Logged Data Graph the date, time and sensor type to be viewed can be selected.
The Monitor and Location ID can also be selected.
Note 2: The Monitor ID is not logged on each record in the monitor but will be stored in the
database against each measurement when the data is downloaded. The data will be tagged
with whatever the monitor ID is at the time of download. Conversely, the location ID is logged
on each record in the monitor.
4.2.4. Tables
While logging directly to a PC, the Real Time Table View or Logged Data Table can be accessed via
the “Data” menu on the menu bar.