User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
88
3.6.15.6. Maintenance Debug Page
The Debug page can be accessed by selecting the Debug button in the More Options section of
the Maintenance page. It provides additional debug capabilities that can be used for lab testing
and in the field
Figure 3-61 Maintenance Debug Page
Table 3-25. Maintenance Debug Page
Field/Control
Description
1
PCI Tests
Writing values to FPGA registers can render the
unit nonoperational and could leave the unit in a
condition where a reboot or power cycle is
requires. Values must be preceded by a 0x.
 Read - Provides the capability to input an
offset to an FPGA register and to read the
value by selecting the Run button to the
right of the row.
 Write - Provides the capability to change
the value of an FPGA register by
supplying the offset of the register and the
value in the appropriate locations.
Selecting the Run button to the right of the
row updates the value.
2
Proc Interface
The proc interface provides supplies debug
information for the different interfaces in the unit.