User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
84
3.6.15.4. Maintenance Page Use Default DB
The Use Default DB button allows the user to revert to the factory default settings. Most saved
configuration settings are lost once the user confirms the selection. A warning message pops up
after selecting the Use Default DB button (Figure 3-59 Maintenance Use Default DB Selection).
The node will reboot once the user confirms their selection.
Note: Settings that do not go back to default:
Start script information
Transec keys
Figure 3-59 Maintenance Use Default DB Selection
3.6.15.5. Maintenance System Tests Page
Station tests can be configured by selecting the Station Tests button on the More Options section
of the Maintenance page. The Station Tests page provides the capability to execute a continuous
sine wave test or a bit error rate test. When either of the tests are executing, the normal operation
of the unit is not functional. Upon test completion the unit should return to normal operation.