User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
78
Figure 3-55 SS Video Page
Table 3-22. Subscriber Station Video Page
Field/Control
Description
1
Video Control
Current Settings
 Allow Bad Frames – Enabling Bad Frames
will allow UDP packets received over the
RF link that have bit errors in them to
continue to be pushed up to the radio’s
Ethernet stack. This check is only made
on UDP packets with destination port
addresses between 1232-1247.
 Currently the camera interface on the
NANO radio has not been implemented.
2
Serial Flow Control
Type
The serial flow feature wraps the serial data in a
UDP IP Packet.
 Serial B to Serial B – This allows
bidirectional serial data to flow from Serial
B of one node to Serial B of another node.
 Serial B To Ethernet – Transfer data
between serial B and Ethernet port
o Rx Only – Receive data from
designated receive port and push
the data out to serial B