User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
66
Figure 3-49 SS Admin Start Script and SW Update
Table 3-17. Subscriber Station Admin Page Transec Key
1
Current Start
Script
The current start script parameters.
2
Generate Script
User can change the mode the radio boots in or the IP
address,etc. The unit should not be powered cycled
while script generation is in process.
 Type radio buttons: Select BS or SS for type
 Id: If setting up start script as SS enter its
Subscriber Number.
 User Interface: Only valid interface for EDL is
the Webgui
 Quagga: Option to enable additional network
routing software suite providing implementations
of Open Shortest Path First (OSPF). Note there
is user configuration necessary to implement
Quagga.
 IPv4 Address: Provides the capability to set a
new IPv4 address for the unit.
 IPv4 Netmask: Provides the capability to set a
new IPv4 netmask address for the unit
1
2
3