User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
56
Table 3-13. Base Station Maintenance Page
Field/Control
Description
 CRCs Rx – Provides the number of CRCs
received. The packet within the frame
where the CRC error was received is
dropped.
 Reset Rx – Provides the number of times
the receive path is reset.
 Tx Frames – Provides the number of
frames transmitted by the unit.
 Tx Drop – Provides the number of transmit
packets that were dropped because there
is no valid class rule for that packet.
3
Board Details
Display Temperature
 CPU Temperature – Displays the
temperature reported by the processor in
Celsius and Fahrenheit
 RF Temperature – Displays the
temperature reported by the AD9361 chip
on the RF card in Celsius and Fahrenheit
4
Ethernet Network
status
Displays the number of transmitted and received
frames on the network side of the unit. This
reflects the eth0 interface in a non-bridging
configuration and the mybridge interface in a
bridging configuration.
5
Network
Tx Oversubscribed – displays the number of
network Ethernet packets that were dropped due
to oversubscribing the unit.
6
Channel Status
Provides some additional values on a connection
basis for debugging and antenna pointing
purposes.
 Station – Displays the name of the
subscriber the entry represents.
--------
OFDM only
 Current CINR – Displays the
instantaneous CINR for the connection.
 Average CINR – Displays the average
CINR of the connection over a period of
received frames.
GMSK Only
 Current SNR – Displays the instantaneous
estimated SNR for the connection.
 Average SNR – Displays the average
estimated SNR of the connection over a
period of received frames.
-------