User's Guide

ManualsBrandsAeronix ManualsElectronicsLOW POWER ISM BAND TRANSCEIVER

Form #: OP_01_TM

Title: Aeronix Data Links – EDL Nano Products User Guide

Document Number: AE301628-001

Revision: B Date: 3 October 2019

Aeronix Proprietary

Table 3-11. Base Station Profile Config Page

Field

Description

succession that meet the change FEC criteria

before moving to another FEC. Valid values are

provided in the pull down menu.

Downstream

Burst Profiles

Displays the downstream burst profiles which define the

FEC types that the base station uses for transmissions.

 Index - Value used internally to index the bust

profiles. The value gets automatically generated.

 DIUC – Downlink interval usage code defined by

802.16d. The values get generated automatically

and are for viewing and debug purposes.

 DCD FEC Code – Defines the forward error

correction and coding for the burst profile entry.

 CINR/SNR Mandatory Exit – Defines the

CINR/SNR value in dBm used by ACM. If current

average CINR/SNR is less than this value then

ACM will exit current FEC code type.

 CINR/SNR Minimum Entry – Defines the

CINR/SNR value in dBm at which ACM allows

entry into the FEC code type. The CINR/SNR

average must be greater than the current FEC

code types CINR/SNR minimum entry and equal

to or greater than the next FEC code types

CINR/SNR minimum entry.

 FEC Mandatory Exit – Defines the largest number

of FEC bits of one symbol in a frame averaged

over the number of frames specified in FEC Entry

Frame Accumulation that can occur before the

decision is made to move out of the current FEC

code type and into a lower more robust FEC code

type. The FECs averaged over FEC Entry Frame

Accumulation must be greater than the FEC

Mandatory Exit before the move will occur.

 FEC Minimum Entry – Defines the largest number

of FEC bits of one symbol in a frame averaged

over the FEC Entry Frame Accumulation can have

before ACM attempts to move to a higher FEC

code type. The FECs averaged over FEC Entry

Frame Accumulation must be equal to or less than

the FEC Mandatory Entry of the current FEC code

type before the move will occur.

 Available – Enable/Disable drop down menu. This

option allows user to disable a certain FEC Code

without deleting it from the database. Enabled

profiles are used in the ACM scheme and disabled

profiles are not used.

Control Buttons

The control buttons allow the administrator to add, modify

and remove burst profiles and to cancel the current add,

modify or remove transaction.