User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
43
Figure 3-33 BS Example Class Rules ADD ENTRY
3.6.3.14. Modifying a Class Rule Using MODIFY Entry
The user can modify a class rule entry by selecting the MODIFY ENTRY button within the
Class Rule section of the Network Config page (Figure 3-22 BS Network Config Class Rules).
The MODIFY button to the right of the entry is selected to modify that entry (Figure 3-34 BS
Example MODIFY ENTRY selection). The user may change the source and destination address
for that class rule (Error! Reference source not found.). The SAVE button to the right of the
ntry is selected to input the new class rule data. The Forwarder Enabled status of the table can be
changed by selecting the Auto Populate button and then checking or unchecking the Enable
Forwarders box. The rule distributes throughout the network as needed.