User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
42
Figure 3-32 BS Example Auto Populate with MAC Address Result
3.6.3.13. Adding Class Rule using ADD ENTRY
The following screen provides an example of the ADD ENTRY functionality for a class rule.
The user can add a class rule entry by selecting the ADD ENTRY button within the Class Rule
section of the Network Config page (Figure 3-22 BS Network Config Class Rules). Once that
occurs a similar screen to Figure 3-33 BS Example Class Rules ADD ENTRY appears. The
administrator selects the service flow for which the rule pertains from the pull down menu. The
administrator then inputs the valid IP/MAC source address and mask and the valid destination
address and mask. Select the ADD button to the right of the entry to input the new class rule.
The rule distributes through the network as needed.