User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
41
3.6.3.12. Auto Populating Class Rules of Type MAC
Auto populating the class rules can also be done when the address type is set to MAC. The
MAC addresses input should be those presented to the unit in bridging mode. They are typically
the address of the peripherals generating the data for the source address and the peripheral
receiving the data for the destination address. In the case of the example network configuration
in Error! Reference source not found. the BS Station MAC would be F0-E0-D0-C0-B0-A0,
S-1 Station MAC would be F1-E1-D1-C1-B1-A1. SS-2 Station has 2 laptops connected to it so
the user needs to add an “Extra Count” of 1 for SS2. SS MACs would be F2-E2-D2-C2-B2-A2
and F3-E3-D3-C3-B3-A3.
The administrator selects the Generate Classifiers button after the MAC addresses and masks are
entered. The class rule generation process begins and should not be interrupted until complete.
Figure 3-31 BS Example Auto Populate with MAC Address
Below is the result of the user selecting the “Generate Classifiers” button.