User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
35
The screen below appears when the user clicks on the Auto Populate Button on the Base Station
Network Configuration Screen.
Figure 3-23 BS Network Config Auto Populate
Table 3-10. Base Station Network Config Auto Populate
Field/Control
Description
1
Auto Populate User
Interface
Automatically generates classifiers based on the
list of Subscribers that are configured. User must
enter the IP/MAC address of the data from each
Station.
 Station – A list of all the stations (including
BS) that are configured, not a user entry.
 SF Indices – The SF index that is
associated with a configured SS, not a
user entry (note: BS does not have SF Id
so it is “---“).
 Station IP - The source external network
station’s Ethernet IP address. This is the
source of data packets.
 Station Mask - Mask to be applied to
Source IP fields, allows you to open up a
range of IP addresses. Currently only the
last subnet byte is allowed to be masked
off.
 Enable Forwarders check box - If
selected, the GUI will populate forwarders
for each configured SS.