User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
32
The service class drop down list contains all service classes defined in the service class section of
the Network Config page. The administrator selects the desired service class. The UL Multicast
Select box, when checked, indicates to the system which service flow will have the uplink data
sent on. Each subscriber can have a maximum of one UL Multicast selected to it. The UL
Multicast is optional; however, if there are multiple service flows defined for a subscriber and
there is no UL Multicast selected, the system will automatically pick one at random. Once all the
fields are complete, the administrator selects the ADD button to the right of the new entry,
adding the new service flow pair to the network.
Figure 3-20 BS Example Add Provisioned SFs
3.6.3.6. Modifying a Service Flow Pair
Existing service flow pair entries can be modified using the MODIFY ENTRY button. The
administrator can only modify the service class for the service flow pair to a service class of the
same schedule type. Changing any of the other service flow parameters requires adding a new
service flow pair with the desired parameters. If a subscriber station already has a UL Multicast
checked for one of its service flows, none of its other service flows will be allowed to have their
Multicast also selected. To select the status of the UL Multicast for a specific subscriber’s
service flow, any service flow already set to use the UL Multicast must be unchecked first. Any
undesired service flow pairs should be removed.
Figure 3-21 BS Example Modify Service Flow