User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
31
Table 3-8. Base Station Network Config Service Class
Field/Control
Description
Not a user entry, this value will be
Downstream SF Id + 1
 Service Class – A drop down selection for
the service class used for scheduling
traffic for the service flow pair.
 UL Multicast Select – Defines the service
flow from which the uplink data will be
sent on. This is only critical if the user has
configured multiple Service Flows for a
subscriber station. Otherwise the only
service flow defined for the Subscriber will
be used.
2
Control Buttons
 Add Entry Button allows for adding a new
provisioned service flow entry. Click on
the button and enter the fields. When the
fields are complete click on the add button
to the right of the entry fields.
 Modify Entry Button allows for modifying a
provisioned service flow entry in the table.
Click on the button and then select the
entry to modify by clicking on the modify
button to the right of the entry line. When
modifications are complete click the save
button to the right of the entry line.
 Remove Entry Button allows for removing
a provisioned service flow entry from the
table. Click on the button and then click
on the remove button to the right of the
entry line to remove.
 Cancel Button allows for canceling the
current add or modify request
Note: The GUI adds both downlink and uplink
SFs at the same time.
3.6.3.5. Generating Service Flows
Service flow pairs can be added for a subscriber in the Network Config page. Only
subscribersconfigured to the network in the station name portion of the Admin Page appear in
the drop drown list for the subscriber name selection of the service flow. The subscriber that the
service flow pair represents is selected. The administrator provides a service flow identification
number for the downstream service flow which should be a number greater than 4 and not be
used for any other service flow id. The upstream identification number is generated
automatically. The service identification numbers are only used for reference.