User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
28
Table 3-7. Base Station Network Config Service Class
Field/Control
Description
1
Service Classes
 Index – the index into the service class
table for the entry. This field is not
entered by the user.
 Name – the user defined name for the
service class. The name can be up to 31
valid characters in length.
 Schedule Type – Defines the 802.16d
scheduling type for the service class. The
entries are defined in a drop down by the
system.
 Max Rate – The maximum data rate for
the service class in Kbps as defined by
the 802.16d schedule type.
 Min Rate – The minimum data rate for the
service class in Kbps as defined by the
802.16d schedule type.
 Priority - Defines the priority of the service
class as defined by the 802.16d schedule
type. The higher number defines a higher
priority (7 is the highest priority). The
priority field is valid for schedule types of
non real-time and real-time.
2
Control Buttons
 Add Entry Button allows for adding a new
service class entry. Click on the button
and enter the fields. When the fields are
complete click on the add button to the
right of the entry fields.
 Modify Entry Button allows for modifying a
service class entry in the table. Click on
the button and then select the entry to
modify by clicking on the modify button to
the right of the entry line. When
modifications are complete click the save
button to the right of the entry line.
 Remove Entry Button allows for removing
a service class entry from the table. Click
on the button and then click on the
remove button to the right of the entry line
to remove.
 Cancel Button allows for canceling the
current add or modify request.
Multicast Note:
A service class for downlink multicast data is automatically configured that defines the
possible bandwidth for multicast messages. The maximum and minimum rate can be
modified according to the expected multicast traffic of your system. The multicast
service class cannot be deleted as multicast support is always on in the bridging
configuration. Multicast is not currently supported in the non-bridging configuration.