User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
23
Figure 3-10 Example Generate Start Script
The left section of the Generate Bridging Start Script will display the current start script settings.
The right section displays the changes the user desires to make to the start script. Once the
‘Generate Script’ button is selected, the old start script will be overwritten with the new start
script changes. Once a reboot or power cycle occurs the new changes will take effect.
3.6.2.6. Software Update Example
The following screens show an example of the software update process. When the user selects
the ‘Browse’ button a window will pop up allowing the user to locate the package file. A user
browses to the location of the manufacturer signed package file and selects the Start Update
button. After a few seconds the update process begins. This process should not be interrupted.
When the process completes, the unit reboots and the new software executes. If problems occur
during software update the error can be viewed via the webgui after reboot or via the serial
console.