User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
16
Figure 3-2 BS Status GMSK RX Dual mode
Table 3-2. Base Station Status Page RX Dual Mode
Field/Control
Description
Tx/Rx Over the
Air Status
The first part of the Tx/Rx Status Table Displays the
receive status of each subscriber connection. The
second part of the table is the amount of data the BS is
transmitting to each active SS.
 Subscriber Name - Configured Subscriber’s
name.
 Current Modulation Type – Contains the current
modulation/FEC type for the subscriber
connection. The display show the modulation of
the receive frame at the time sampled.
 Rx Signal Strength: Contains an assessment of
the receive signal strength.
 RSSI0 (dBm) – Display the RSSI value
measured at the P1 antenna
 RSSI1 (dBm) – Display the RSSI value
measured at the P2 antenna
 Service Flow – Identifies the service class of the
service flow for the connection.
 State – Displays the state of the connection.
The valid values are provisioned and active.
 Est User B/W (Mbits/sec) – Displays the
estimated bandwidth in megabits per second
being used by the connection in the transmit
direction.
 Est Allocated B/W (Mbits/sec) – Displays the
estimated bandwidth in megabits per second
being allocated to the connection in the transmit
direction.
 Service Flow Oversubscribed – Displays the
number of Ethernet packets dropped because
the number of packets for that specific service
flow has reached its limit and is full.
If the OFDM base station is no longer receiving valid receive information for a connection, the
row for that connection will be displayed in red, which could mean the data is stale. If the base