User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
14
Figure 3-1 BS GMSK Status
Table 3-1. Base Station Status Page
Field/Control
Description
1
Status
Status displays a subset of current settings.
 MAC Address – The IEEE 802.16 MAC address
of the base station
 Current Channelization – Displays the
channelization of the base station. The
channelization may be changed on the Radio
Control Screen.
 Current Channel – The current 802.16 specified
channel that the base station uses for transmit
and receive. The channel may be changed on
the Radio Control screen.
 BS Estimated EIRP – Displays the estimated
EIRP of the base station based upon user
configured gain a loss values. (Est Tx Pwr +
Antenna Gain – External Tx Cable Loss –
Antennal Cable Loss – Internal Tx Loss )
 Tx - Provides the status of the transmit portion of
the unit. (On/Off) The status may be changed
on the Radio Control screen.
 Rx - Provides the status of the receive portion of
the unit. (On/Off) The status may be changed
on the Radio Control screen.
 Transec Status – Displays the status of Transec
(on or off). The Transec status can be changed
on the Admin Screen.
2
Board Details
Display Temperature
 CPU Temperature – Displays the temperature
reported by the processor in Celsius and
Fahrenheit
 RF Temperature – Displays the temperature
reported by the AD9361 chip on the RF card in
Celsius and Fahrenheit
3
Front Panel
Displays PHY status on an interval basis.
Base is a constant green light if the radio is
configured as a Base Station
 Sync is off on the base station when no
subscribers are registered and is illuminated
continuously when subscribers are registered.
 Recv is green when the radio is receiving
messages
 Xmit is green when the radio is transmitting data
 Alarm