User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
9
2.3.1. USB OTG
USB OTG port is currently only used to download initial firmware. Software to use the USG
OTG to recognize other applications has not been implemented.
2.3.2. USB Host
Software has not been formally tested.
2.3.3. Ethernet 1 & 2
Ethernet ports are both IEEE802.3 compliant 10/100 Mbps connection. Ethernet 1 is the primary
Ethernet for the radio. Ethernet 2 currently is not configurable and usable on the radio.
2.3.4. Console RS-232
The Serial interface allows direct communication with the radio’s control processor. This
interface is a RS-232 standard interface. Port is configured as 8-N-1, 115200 BAUD. This port
provides the radio’s login console. You can login with administrative privileges by entering
“root” at the login prompt and password “1234”.
Table 2-9. J2: Camera IF Pin Definitions
Pin
Description
1
3 VDC
2
Ground
3
CAM SDA
4
CAM CLK
5
CAM SCL
6
CSI D3P
7
CAM EN
8
CSI D3M
9
CAM RST#
10
Ground
11
CSI D0P
12
CSI D2P
13
CSI D0M
14
CSI D2M
15
Ground
16
Ground
17
CSI D1P
18
CSI CLKDP
19
CSI D1M
20
CSI CLKDM