User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
106
Serial B To Ethernet Rx Only = 1
Serial B To Ethernet Tx Only = 2
Serial B To Ethernet Both Rx and Tx = 3
Serial Baud Rates (unsigned) : 4800, 9600, 19200, 38400, 57600,
115200
Raw Mode enumeration (integer):
Raw Mode = 1
Normal = 0
snmpset -v 3 -l AUTHPRIV -a SHA -A Aeronix1% -x DES -X Aeronix1%
-u user -m $PWD/AERONIX-802.16-MIB.mib.txt 192.168.8.1
serialDirection.1 u 0 serialBaudRate.1 u 4800
enaSerialTransfer.1 i 1 serialTxPort.1 u 3000 serialRxPort.1 u
3001 serialTxIP.1 s "192.168.2.10" serialRawMode.1 i 0
Response:
AERONIX-80216-MIB::serialDirection.1 = Gauge32: 0
AERONIX-80216-MIB::serialBaudRate.1 = Gauge32: 4800
AERONIX-80216-MIB::enaSerialTransfer.1 = INTEGER: enable(1)
AERONIX-80216-MIB::serialTxPort.1 = Gauge32: 3000
AERONIX-80216-MIB::serialRxPort.1 = Gauge32: 3001
AERONIX-80216-MIB::serialTxIP.1 = STRING: 192.168.2.10
AERONIX-80216-MIB::serialRawMode.1 = INTEGER: 0
3.7.3. SNMP Unsupported configurations
3.7.3.1. BERT and CW test
SNMP does not allow the user to run BERT and CW test.
4. Determining NANO Radio configuration
If the user is not aware of the Radio IP or the radio mode, below are some methods by which
they can learn the current configuration the NANO radio.
4.1. Two ways to determine radio IP address
4.1.1. Use Console
1) Attach USB to Serial to a Laptop and use Console to get IP address
2) Connect to Serial A port with terminal emulator. (Baud = 115200, 8-N-1 no flow
control)
3) Login by typing “root”
4) Enter password “1234”.