User's Guide

Form #: OP_01_TM
Title: Aeronix Data Links – EDL Nano Products User Guide
Document Number: AE301628-001
Revision: B Date: 3 October 2019
Aeronix Proprietary
105
 Creating classifier IP rule entry
1) Verify SNMP is classifier mod is set to IP, if not set classifierMacAddrMode.1 to 0
snmpget -v 3 -l AUTHPRIV -a SHA -A Aeronix1% -x DES -X Aeronix1%
-u user -m ./AERONIX-802.16-MIB.mib.txt 192.168.100.1
classifierMacAddrMode.1
classifierMacAddrMode:
0 = IP Mode
1 = MAC Mode
2) Create entry row
Assuming an empty classifier table first index will start at 1.
snmpset -v 3 -l AUTHPRIV -a SHA -A Aeronix1% -x DES -X Aeronix1%
-u user -m ./AERONIX-802.16-MIB.mib.txt 192.168.100.1
wmanIfBsClassifierRuleRowStatus.1 i 4
3) Fill in new entry row
snmpset -v 3 -l AUTHPRIV -a SHA -A Aeronix1% -x DES -X Aeronix1%
-u user -m ./AERONIX-802.16-MIB.mib.txt 192.168.100.1
wmanIfBsSfIndex.1 i 4 wmanIfBsClassifierRuleIpSourceAddr.1 s
192.168.100.2 wmanIfBsClassifierRuleIpSourceMask.1 s 255.255.0.0
wmanIfBsClassifierRuleIpDestAddr.1 s 192.168.1.2
wmanIfBsClassifierRuleIpDestMask.1 s 255.255.0.0
4) Create entry row
snmpset -v 3 -l AUTHPRIV -a SHA -A Aeronix1% -x DES -X Aeronix1%
-u user -m ./AERONIX-802.16-MIB.mib.txt 192.168.100.1
wmanIfBsClassifierRuleRowStatus.2 i 4
5) Fill in new entry row
snmpset -v 3 -l AUTHPRIV -a SHA -A Aeronix1% -x DES -X Aeronix1%
-u user -m ./AERONIX-802.16-MIB.mib.txt 192.168.100.1
wmanIfBsSfIndex.2 i 5 wmanIfBsClassifierRuleIpSourceAddr.2 s
192.168.1.2 wmanIfBsClassifierRuleIpSourceMask.2 s 255.255.0.0
wmanIfBsClassifierRuleIpDestAddr.2 s 192.168.100.2
wmanIfBsClassifierRuleIpDestMask.2 s 255.255.0.0
 Removing classifier rule entry
Remove first entry in table, .1 after wmanIfBsClassifierRuleRowStatus is the row index
snmpset -v 3 -l AUTHPRIV -a SHA -A Aeronix1% -x DES -X Aeronix1%
-u user -m ./AERONIX-802.16-MIB.mib.txt 192.168.100.1
wmanIfBsClassifierRuleRowStatus.1 i 6
3.7.2.16. SNMP configure Serial Flow
Serial Flow Types enumerations (unsigned) :
Serial B to Serial B = 0