Instruction manual

Problem Check Remedy

Check that the

AC/DC Adapter is

not faulty.

Try to operate the

Control Module

by using batteries

instead of the

AC/DC Adapter. If

the Control Module

functions properly

with batteries but

not with the AC/DC

adapter, replace the

AC/DC Adapter.

No visible

aerosol

when power

source is

functioning

Check that there is

medication in the

Medication Cup.

Fill the Medication

Cup with prescribed

medication.

Check that the

nebulizer has been

properly cleaned.

Clean the

Aeroneb

Go. Refer

to page 11.

If above remedies do not work, call your local supplier.

ELECTROMAGNETIC SUSCEPTIBILITY

This device meets the requirements of IEC/EN60601-1-2

which describes requirements for electromagnetic

compatibility (EMC) of medical devices. This includes

immunity to radio frequency electric elds and electrostatic

discharge, in addition to the other applicable requirements

of the standard. Compliance with EMC standards does not

mean a device has total immunity; certain devices (cellular

phones, pagers, etc.) can interrupt operation if they are used

near medical equipment.