User's Manual

Chapter 8 HiveManager Configuration Examples
130 Aerohive
SSID: guest
1. Click New.
2. Depending on which guest access method you used (see "Example 3: Providing Guest Access" on page 104),
enter either of the following to define the WLAN mappings for the guest SSID, and then click Apply:
For guest access using a preshared key:
• SSID Profile: guest
•MGT Service Filter: def-service-filter (default)
• AAA Servers: (leave empty)
•RADIUS UP Rule: def-radius-user-profile-rule (default)
•Radio Mode: 11ng(b/g)
•User Profile: Guests
After you click Apply, choose Default as the user profile type.
or
For guest access using a captive web portal:
• SSID Profile: guest
•MGT Service Filter: def-service-filter (default)
• AAA Servers: (leave empty)
•RADIUS UP Rule: def-radius-user-profile-rule (default)
•Radio Mode: 11ng(b/g)
•User Profile: Guests and Unregistered-Guests
After you click Apply, choose Default as the user profile type for Unregistered-Guests. Choose Registered
as the user profile type for Guests.