User's Manual

Diagonal Dropped Ceiling Track Mount
Follow these steps and the illustration to mount an AP250 in the diagonal position on a
standard dropped ceiling track.
1. Attach the diagonal bracket to the device by slipping the mount tabs on the device
over the plain edges of the bracket.
2. Rotate the bracket until the mount clips on the device click into place over
the
bracket edge.
3. Hold the device upside down and slip the mount clips on the diagonal bracket over
the edges of the ceiling track. Because you are installing the device from below, it is
helpful to use your fingertips to identify the location of the mounting tabs by touch.
4. Press the device gently against the track and rotate it until the mount clips click into
place.
Pag
e 10 of 15
Aerohive AP250