User's Manual
Table Of Contents
- Contents
- Aerohive AP230
- AP230 Product Overview
Chapter 1 Aerohive AP230
6 Aerohive
The pin assignments in the Ethernet ports follow the TIA/EIA-568-B standard (see Figure 2 on page 7). The
ports accept standard types of Ethernet cable—cat3, cat5, cat5e, or cat6. Because the ports have
autosensing capabilities, the wiring termination in the Ethernet cable can be either straight-through or
cross-over.
Aerohive provides the following PoE injectors as an optional accessory:
• AH-ACC-INJ-20W-EU
• AH-ACC-INJ-20W-US
• AH-ACC-INJ-20W-AU
• AH-ACC-INJ-20W-IL
If an AP is connected to both an AC power source and PSE, the AC power source takes priority. If the device
loses power from that source, it automatically switches to PoE. If the AC power comes back online, the AP
automatically switches back to AC.
Each time the AP switches from one power source to another, it must reboot.
Preliminary Draft