Instruction Manual

24-Hour
Light
Water LowAdd Nutrients
Replace
Bulbs
Salad
Greens
Flowers
Vegetables Live Plants
Herbs
8
Plug Cord into Electrical Outlet
A
3
Starting Your Garden
Select Setting
B
Note: Depending on the plant type selected, your
AeroGarden 6 Elite
+
lights will automatically
turn on and off at pre-programmed intervals.
Press the SELECT button until you reach the type of plant you are growing
(Vegetables, Salad Greens, etc.).
A green light on Control Panel will illuminate.
Grow Bulbs will come on.
Look under Lamp Hood to check that both bulbs are lit.
If not, check to see if:
Grow Bulbs are properly inserted in Lamp Hood
(page 2, step 1C).
Lamp Cord is plugged into Lamp Hood (page 2, step 1D).
You are getting power through the electrical outlet.
Air bubbles should be visible inside Bowl.
If not, check to see if:
Bowl is securely seated on Air Coupling in Base (see page 3, step 1F).
Bowl has water up to Fill To Here.”
What will happen...
1
2
3
View Door
Plug in