- AeroGrow International, Inc. Indoor Greenhouse Kit Quick Start Guide

13
!
Bundle cord when furnishing is not in use.
Before planting a new garden, be sure to restart the nutrient timer.
• Press and hold “Reset” button until the red “Add Nutrient” light blinks 3 or 4 times
(approximately 9 seconds).
• Release “Reset” button. “Add Nutrient” light will turn off.
• Your nutrient timer is now reset.
(In some cases you may see other lights blink as well. This is nothing to worry about.)
Remember to...
• Replace your Grow Bulbs after 6 months of use.
Grow Bulbs can be ordered at
www.aerogardensupport.com or from your retailer.
• Sanitize your AeroGarden before re-planting (see page 12).
• Set Lamp Hood to the lowest position when starting a new garden.
If you have already grown a garden in your AeroGarden, please follow the instructions below to
reset the nutrient timer:
If this is the FIRST garden planted in your AeroGarden, you may DISREGARD these
instructions.
Prepare For Your Next Garden (continued)
Replanting Your AeroGarden
Add Nutrient
Reset