User manual

30
The UT200SpW4RTR-EVB can plug directly into the J9 connector on the LEON-3FT evaluation board. A ribbon cable can
also be used to easily use the SpaceWire evaluation board with the LEON-3FT board when the LEON board is plugged into a
cPCI chassis. Using the ribbon cable to connect the SpaceWire evaluation board to the LEON 3FT GR-UT699 evaluation
board allows for easier access to the SpW ports on the UT200SpW4RTR-EVB board.
The virtex-2 FPGA is connected to the HOST port of the UT200SpW4RTR device. J9 on the GR-UT699 evaluation board is
also connected to the V2 FPGA; control of the SpW router can be gained by accessing the connections listed in table 3 above.
For further information on interfacing the UT200SpW4RTR-EVB with the GR-UT699 Evaluation board please see the
Aeroflex Gaisler GR-UT699 Development Board User Manual.