Operating instructions

GENERAL INFORMATION
1-15
Cellular and trunking
Test Modes Auto test/manual test
Auto Test Programs (dependent upon which
system is in use)
Call processing only
Call and RF testing
Brief testing
Comprehensive testing
Parametric Auto Test Routines
AF frequency AF Level
FM deviation Mod frequency
Rx distortion Rx expansion
Rx sensitivity Rx SINAD
Rx S/N Tx compression
Tx distortion Tx frequency
Tx level Tx power level
Tx limiting Tx mod level
Tx noise Tx SINAD
Tx S/N
Signaling Auto Test Routines
Registration/roaming update PTT on
Place call PTT off
Page mobile SAT deviation
Clear from land SAT frequency
Clear from mobile ST duration
Handoff ST frequency
Hook flash ST deviation
DTMF decode DSAT deviation
Data performance
Frequency standard
Internal Frequency Standard (OCXO)
Frequency 10 MHz
Temperature stability Better than 5 parts in 10
8
, 0 to 55°C
Ageing Rate Better than 1 part in 10
7
per year, after 1 month's continuous use.
Warm up time Less than 10 minutes to within 2 parts in 10
7
at 20°C
External Frequency Standard Input
Frequency 1, 2, 5 and 10 MHz
Input Level Greater than 1 V peak to peak
Input Impedance Nominally 1 kΩ