Operating instructions

LOCAL OPERATION
3-97
Storing system MI-BASIC programs
User defined SYSTEM test programs, which are written in MI-BASIC, can be stored on memory
cards as explained above. These must be down-loaded into the Service Monitor before they can
be transferred onto a memory card.
Printing from memory cards
The contents of memory card store locations, with the exception of SYSTEM test results, can be
sent directly to a printer, without recalling into the Service Monitor display.
To print the contents of a store location, proceed as follows:-
Make sure that a suitable printer is connected, and that the Service Monitor is correctly
set up to drive it (see Printer on page 3-100).
Access the STORE/RECALL screen.
Press the [Print Store] key. The flashing inverse video message, 'Print Store No.' will be
displayed.
Key in the two digit address of the store location to be printed.
The contents of the store will be printed.
When the printout is complete, the Service Monitor can be configured for further tests or
operations.