Operating instructions

ii 46882-311D
About this manual
This manual explains how to use the Communications Service Monitor 2945A. It applies to
instruments fitted with main software version 4.xx and cellular software version 4.xx.
Intended audience
People who need to test mobile radio systems and associated equipment.
Structure
Chapter 1
General information and performance specification.
Chapter 2
Gives installation instructions, including connection of peripheral equipment.
Chapter 3
Operating instructions. Setting up and use.
Chapter 4
Brief technical description.
Chapter 5
Acceptance testing procedure for the Service Monitor.
Appendix A
Use of the Directional Power Heads, 54421/002 and 54421/003.
Appendix B
Use of the Light-weight Directional Power Heads 54421/016 and 54421/018.
Document conventions
The following conventions apply throughout this manual:-
[Tx TEST] Hard key titles are shown verbatim, using normal lettering in
square brackets.
[Tx freq] Soft key titles are shown verbatim using italic lettering in square
brackets.
RF IN/OUT Titles on the instrument panels are shown verbatim using capital
letters.
Text displayed on screen. See below
†
†
References to text displayed on the screen of the Service Monitor are given verbatim, using
a font that resembles the displayed text. e.g.
GEN FREQ:
,
Ref Level:
, 0G+:
Associated publications
Other manuals that cover specific aspects of this service monitor are:-
•
Programming Manual (46882-318B) provides programming information for remote
control of the Service Monitor using MI-BASIC and GPIB.
•
Maintenance Manual (46882-310W) provides servicing information for the
Communications Service Monitor 2945A and Avionics Communication Service
Monitor 2946A.
contd./...