User's Manual

values obtained after performing the
4 tests included in a session.
Displayed test are compared to a
reference table (GLI) and displayed
as percent predictive value (%pred.).
The reference used in PeakFlow
+
uses expected normal lung function
values such as for FEV1 and PEF are
based on ethnicity, gender, age and
height.
Note: Home use of PeakFlow
+
is
intended only for indicative purpose.
Interpretation of the test results and
diagnosis shall be done by a
healthcare professional only.
STORAGE AND
MAINTENANCE
Handle PeakFlow
+
device
carefully. Store it in clean and
moisture free conditions. Before use,
always check that the device is free
from dust, contamination or any
particles.
PeakFlow
+
does not require
professional maintenance. If,
however, the outside of the device
needs to be cleaned make sure to
only use a damp cloth without any
detergents. The batteries of
PeakFlow
+
are
replaceable.
If the storage temperature is below
20C, allow the device to warm up
before use.
If the storage temperature above
60C, allow the device to cool down
before use.
Keep the PeakFlow+ device out of
reach of infants, pets or pests.
ACCESS TO BLUETOOTH
Enable Bluetooth on your mobile
device in order to pair with the
PeakFlow
+
device. You can enable
Bluetooth in your mobile device
settings. Check your device manual
on how to do this.
BLUETOOTH PROXIMITY
Make sure that the PeakFlow
+
is
within the Bluetooth proximity of
your phone. If your phone is too far