User's Manual

The acceptability of a test is the
responsibility of the user. Special
attention should be given when
testing the elderly, disabled and
children.
The device should never be used
when it is possible or probable that
the validity of the results may be
compromised due to any external
factors.
Some conditions may pose a
relative danger to a patient or
affect the validity of peak flow
performance and results. These
include, but are not limited to
unstable cardiovascular status,
unstable angina, recent myocardial
infarction (within one month) or
pulmonary embolism, haemoptysis
of unknown origin,
recent pneumothorax, thoracic,
abdominal or cerebral aneurysms,
recent thoracic, abdominal or eye
surgery, acute disorders such as
nausea or vomiting, severe
respiratory distress, physical
limitations, cognitive impairment,
dementia.
IMPORTANT SAFETY
WARNINGS
Once removed from its packaging,
check that there is no visible damage
on the device. In the case of damage
do not use it and contact us
immediately.
PeakFlow
+
has been examined by an
independent laboratory which has
certified the conformity of the device
to the ISO 60601-1 and guarantees
the EMC Requirements within the
limits set ISO 60601-1-2 and ETSI’s
EN300328. It is a medical device
class IIa (“two a”) product. PeakFlow
+
is constantly controlled during its
production, therefore the product
conforms to the essential
requirements set by the Council
Directive 93/42/EEC for medical
devices.
• Use only with iOS and Android
devices specified on our website
www.aerobithealth.com
• Use only in environments specified
in this user manual.
• Do not expose to liquids.
• Should you lose the battery
hatch with required and device