User's Manual

Follow operating instructions:
Indicates the need for user to consult
the instructions for important
information.
OPERATING ENVIRONMENT
SpiroLite has been designed for use
in a doctor’s office, in a
hospital setting or at home.
SpiroLite is not intended for use in an
operating theatre nor in the presence
of inflammable liquids or detergents,
nor in the presence of inflammable
anaesthetic gases (oxygen or
nitrogen). The device is not designed
to be used in direct air currents (e.g.
wind), sources of heat or cold, direct
sun rays or other sources of light or
energy, dust, sand or any other
chemical substances.
AEROBIT REUSABLE
TURBINE
SpiroLite is designed to be used with
a mouthpiece attached to an Aerobit
Reusable turbine.
Before each use, the Reusable
turbine should be cleaned, and a new
unused mouthpiece should be used.
For best results, use Aerobit
Mouthpieces, visit aerobithealth.com
for more info.
The integrity and functionality are
guaranteed by:
• Never holding the turbine under a
jet of water or air and never let it
come into contact with high
temperature fluids.
•Not allowing dust or foreign bodies
to enter the turbine sensor, in order
to avoid incorrect functioning and
possible damage. The presence of
any impurities such as hair, sputum,
threads etc. within the body of the
turbine sensor may seriously
compromise the accuracy of the
measurements.
• Avoiding environmental
contamination by cleaning waste
products, the user must adhere to all
relevant regulations. The Reusable
turbine must be properly disinfected
before each test.