Instructions / Assembly

8
Figure 9
Figure 10: Inserting Safety Barrier
How to Install the Safety Barrier:
7.) Locate the four mounting tabs on the safety barrier (Fig. 9). Insert
the safety barrier into the locking tabs on base flange (Fig 8), (Fig. 9)
& (Fig. 10). Barrier mounting tabs may require individual adjustment
and alignment while seating the barrier onto flange. Note the barrier
can bend slightly to accommodate for manufacturing tolerances.
Once positioned, apply downward pressure to center of barrier.
8.) Confirm all four mounting tabs are positioned adjacent to all four
locking tabs. Rotate the safety barrier clockwise, the direction the
“LOCK ARROW” points. A slight rap with the palm of the hands in the
safety barrier triangular openings will seat the safety barrier in place.
9.) Grasp the center of the safety barrier and pull upward. It must not
dislodge from the assembly. If any of the mounting tabs are not
engaged with the locking tabs, remove the safety barrier and repeat
step 7 through step 9 until the safety barrier is secure.
”
77”
77”
77”
WARNING: FAILURE TO PROPERLY ENGAGE THE SAFTEY
BARRIER WILL DEFEAT THE SAFETY FEATURE OF THE
DEVICE!
Mounting Tab