Instructions / Assembly

Critical Safety Warning:
Always securely attach Cover to Riser by installing and tightening the (4)
screws using the appropriate driver tool. Cover must be checked after each
tank servicing. Cover must be inspected regularly for damage and security.
The secondary safety barrier must be securely fastened in place at all times.
The safety barrier must only be removed to gain entry into the tank by a
properly credentialed professional donning appropriate safety gear.
Tools Required:
 Safety Gloves/Glasses
 Utility Knife
 #3 Phillips head driver bit
 5/32” drill bit (carbide tip if septic tank is concrete)
IMPORTANT! Use sanitary gloves when working with
septic system components, installing equipment into the
septic system or handling any equipment that has come
into contact with septic effluent. Wear protective eye gear
at all times during the installation process.
Installation Video:
An installation video overviewing the assembly of our kits can be viewed at www.Aero-
Stream.com. This video is only a high-level description on how the riser is to be installed.
Please always follow the illustrated installation guide that is shipped with the product for
specific instructions regarding the assembly process.
CAUTION: INSTALLER AND SERVICE PERSONNEL MUST PLACE
THIS GUIDE IN PLASTIC POUCH AND ENSURE IT IS ATTACHED TO
THE SAFETY BARRIER AFTER INSTALLATION IS COMPLETE