Instructions / Assembly

Mount grille carefully so the lead wire of light

unit is not pinched.

Fig.11

Fig.8

Insert mounting springs into slots and mount grille

to fan body. (Fig.9）

Grille

Celling

Slot

Mounting spring

Fig.9

Finsh ceiling work. Align ceiling hole with the inside

edges of the flange. (Fig.8)

After finishing the celling work, fill gap between

flange and celling with caulk or other sealant to

prevent air leakage.

Caulk

IMPORTANT:

Unit: inches (mm)

Before turning on the light, make sure the

connector is at the correct position. If not,

the lighting will not work.

The claw of connector must be secured to

the rib completely. (Fig.10)

Fig.10

For grille with a light, refer to the following

installation method.

Insert the grille mounting spring on the wiring side

into the slot. (Fig.10)

Insert the plug connector into the housing of the

lighting unit and insert other mounting spring into

the slot as shown and mount grille to fan body.

(Fig.10, Fig.11)

10 2/5 (265)

Celling

INSTALLATION I（NEW CONSTRUCTION）CONTINUED

CAUTION:

！

CAUTION:

！