User Manual

4
1. REMOTE CONTROL
• Some of the buttons of the remote control are
not used for the required air conditioner and are
therefore not described in these instructions.
Pressing of these keys will not affect the operation of
the air conditioner.
• Check there are no obstructions between the
receiver and the remote control.
• The maximum distance between the IR receiver and
the remote control is 8 metres, to ensure the signal is
correctly received.
• Position the remote control at least 1 metre away
from TVs, radios, stereos, etc. There may be some
audio and video interference.
• Do not drop or throw the remote control.
• Do not let liquids enter the remote control, and do
not leave it in direct sunlight or in hot places.
• When the remote control sends a signal the symbol
appears on the display, the receiver of the indoor
unit emits a sound to confirm reception of the signal.
Keys available
on remote control
3
1
6
4
9
7
10
14
2
5
8
11
12
13
Index Function of the button:
1
Operating mode selection
2
Switches the unit on or off
3
Sets the fan speed
4
Sets the operation of the motorised air
discharge fin (swing function)
5
Increases value (operating setpoint, timer,
etc.)
6
Activates or deactivates the maximum fan
speed (TURBO)
7
Activates or deactivates the SLEEP function
(this function is applicable to the cooling
and heating modes). Once activated this
function will control the unit in order
to maintain an ideal temperature (this
temperature is automatically calculated and
cannot be set)
8
Decreases value (operating setpoint, timer,
etc.)
9
It displays in the indoor unit’s monitor the set
temperature and the room air temperature
(or the external air temperature)
10
Sets the time on the system clock
11
Activates or deactivates the WIFI card
(available with accessory WIFIKIT/WIFIKIT10)
12
Activates or deactivates the display of
information of the indoor unit
13
Activates, deactivates or changes the
programmed switch on timer
14
Activates, deactivates or changes the
programmed switch off timer