User Manual
Table Of Contents
- 1. REMOTE CONTROL
- 2. FUNCTIONS AVAILABLE THROUGH THE REMOTE CONTROL
- switching the unit on or off
- SELEcting an operating mode
- SETTING THE OPERATING SETPOINT
- SETTING THE FAN SPEED
- SETTING THE MOTORISED DISCHARGE FIN (SWING)
- SETTING A SYSTEM TIME
- SETTING or cancelling a programmed SWITCH OFF (TIMER OFF)
- SETTING or cancelling a programmed switch on (TIMER on)
- ACTIVATING / DEACTIVATING THE EXTENDED VENTILATION
- VIEW THE AMBIENT AIR, SET POINT OR OUTDOOR AIR (IN THE DISPLAY OF THE INDOOR UNIT)
- ACTIVATING / DEACTIVATING THE TURBO FUNCTION
- activating / deactivating the NIGHT-TIME COMFORT FUNCTION
- ACTIVATING / DEACTIVATING the indoor unit’s display
- setting or removing the button lock
- SETTING THE UNIT OF MEASUREMENT
- activating/deactivating the anti-freeze function
- ACTIVATING OR DEACTIVATING THE ENERGY SAVING FUNCTION
- activating/deactivating the ifeel function
- ACTIVATE OR DEACTIVATE THE WIFI FUNCTION (ONLY WITH THE ACCESSORY WIFIKIT/WIFIKIT10)
- REPLACING THE REMOTE CONTROL’S BATTERIES
15
ACTIVATING/DEACTIVATING THE ANTIFREEZE
FUNCTION
In the event that is sought to keep a safety temperature
during winter (e.g. a prolonged absence in the place
where the unit is installed) the unit has the anti-freeze
function, where it keeps the room temperature within
the 8°C (during heating mode); while pressing the
buttons and the function activates and the
icon ( ) shows in the display; in order to deactivate the
function press the buttons
and
at the same
time.
Setting the anti-freeze
function
Activating or deactivating
the energy
saving function
ACTIVATING OR DEACTIVATING THE ENERGY SAVING
FUNCTION
The ENERGY SAVING function makes it possible to reach
the set temperature with lower energy consumption.
In COOLING mode:
simultaneously press + to set the ENERGY
SAVING function.
On the remote control display, the
icon will appear
or disappear to indicate whether the function is
activated or deactivated.
NOTA:
In ENERGY SAVING mode, the fan speed (set on
AUTO) and set temperature cannot be altered.
The TURBO and ENERGY SAVING functions cannot
work at the same time.