User Manual

11
SETTING OR CANCELLING A PROGRAMMED SWITCH
ON TIMER ON
The units possess a timer used to program switching on
by specifying the time that you want the unit to start.
If the unit is switched off (and no other programmed
switch on is present), by pressing the key you enter
the time programming mode (in this mode the ”ON”
icon to the right of the time flashes) and by pressing
the keys and it is possible to set the switch
on time;
Pressing the button again confirms the time and
activates the timer programme.
If you want to cancel a programmed switch on,
just press the key to cancel the previous
programming
NOTE:
Once a programmed switch on is set, the operating
mode, the working setpoint and fan speed, will be
the same as those present when the unit stops.
NOTE:
Every time the unit is turned off, the function
deactivates automatically.
Setting a programmed switch
on
ACTIVATING / DEACTIVATING THE EXTENDED
VENTILATION
During the operation in cooling or dehumidification
mode the condensate caused by the humidity in the
air is formed on the heat exchanger within the unit.
This function allows the ventilation to be extended
for two minutes after the unit is switched off,
thereby drying the heat exchanger.
If the unit is on (and the cooling or dehumidification
mode is selected), pressing the for at least 2
seconds, allows activating or deactivating of this
function. On the remote control the display the icon
MODEON/OFF
FAN
CLOCK
X-FAN
TURBO SLEEP LIGHT
TEMP
TIMER OFF
TIMER ON
will appear or disappear to indicate if the function
is activated or deactivated.
Setting the extended
ventilation function