User Manual
Table Of Contents
- 1. REMOTE CONTROL
- 2. FUNCTIONS AVAILABLE THROUGH THE REMOTE CONTROL
- switching the unit on or off
- SELEcting an operating mode
- SETTING THE OPERATING SETPOINT
- SETTING THE FAN SPEED
- SETTING THE MOTORISED DISCHARGE FIN (SWING)
- SETTING A SYSTEM TIME
- SETTING or cancelling a programmed SWITCH OFF (TIMER OFF)
- SETTING or cancelling a programmed switch on (TIMER on)
- ACTIVATING / DEACTIVATING THE EXTENDED VENTILATION
- VIEW THE AMBIENT AIR, SET POINT OR OUTDOOR AIR (IN THE DISPLAY OF THE INDOOR UNIT)
- ACTIVATING / DEACTIVATING THE TURBO FUNCTION
- activating / deactivating the NIGHT-TIME COMFORT FUNCTION
- ACTIVATING / DEACTIVATING the indoor unit’s display
- setting or removing the button lock
- SETTING THE UNIT OF MEASUREMENT
- activating/deactivating the anti-freeze function
- ACTIVATING OR DEACTIVATING THE ENERGY SAVING FUNCTION
- activating/deactivating the ifeel function
- ACTIVATE OR DEACTIVATE THE WIFI FUNCTION (ONLY WITH THE ACCESSORY WIFIKIT/WIFIKIT10)
- REPLACING THE REMOTE CONTROL’S BATTERIES
10
SETTING A SYSTEM TIME
These units are equipped with an internal clock which
can display the current time; by pressing on the
key the clock icon will start to flash (this flashing
will last 5 seconds, after this if no key is pressed you
automatically exit the time modification mode); while
the clock icon is flashing it is possible to change the
system time using the keys and
to increase
or decrease the displayed time; once the desired value
is set you need to wait 5 seconds or press the
key
again to confirm the value (once confirmed the clock
icon will stop flashing)
SETTING OR CANCELLING A PROGRAMMED SWITCH
OFF TIMER OFF
The units possess a timer used to program switching
off by specifying the time that you want the unit to
deactivate. If the unit is switched off (and no other
programmed switch off times are present), by pressing
the
key you enter the time programming mode
(in this mode the ”OFF” icon to the right of the time
flashes) and by pressing the keys
and it is
possible to set the switch off time;
Pressing the button again confirms the time and
activates the timer programme. If you want to cancel
a programmed switch off, just press the
key to
cancel the previous programming
Setting the
system time
ATTENTION:
The units can simultaneously manage an
ignition timer and one-off, so as to provide a
time slot within which allow operation of the
unit
Setting a
programmed
deactivation