Operation Manual

64
EN
IMDCFJ. 12.05 6343841_03
INSTALLER 3 menu
Setting operational parameters (installer level)
Factory settings
Index - String
MIN
value
MAX
value
Parameter function
, , ,
0 999 factory settings
To access the INSTALLER_2 menu, follow the same procedure described for the INSTALLER menu; the only difference
is the value of the password, which is 84.
Fig.9b Fig.10b
PASSWORD = 084
WARNING The following parameters
must only be modifi ed by qualifi ed
personnel authorised to install the
unit.
Setting maximum DCP Volt
Index - String
MIN
value
MAX
value
Parameter function
2.0V 9.9V
This parameter allows you to set the maximum speed of the fans in the CL units, the greater
the value of this parameter, the higher the pressure available at fan; for an accurate setting
of this parameter, please consult the table “Setting maximum DCP Volt “the manual installa-
tion of the units CL