Operation Manual

Fig. 90 - Battery Compartment

Battery Removal

 Remove the Retaining Bar located across the lower portion of

the Battery (Fig. 90a).

 Remove the Hatch O-ring. DO NOT use tools.

 Using care not to damage the Battery Contacts (Fig. 90 b/c),

slide the Battery up and out of the right side of the Battery Com-

partment.

CAUTION: Do not allow a metal object to short cir-

cuit the top of the Battery which is positive (+) to

the negative ( - ) contact of the Battery Compart-

ment.

 Closely check all of the sealing surfaces for any signs of damage

that might impair proper sealing.

 Inspect the Buttons, Lens, and Housing to ensure they are not

cracked or damaged.

 If it is necessary to clean the Battery Compartment, flush it and

all components with a solution of 50% white vinegar and 50%

fresh water.

 Rinse with fresh water, and allow to dry overnight, or blow dry

with a hair dryer (set at 'no heat').