Operation Manual

CARE AND CLEANING

Protect your XR2 from shock, excessive temperatures, chemical

attack, and tampering. Protect the lens against scratches with an

Instrument Lens Protector. Small scratches will naturally disap-

pear underwater.

CAUTION: Never spray aerosols of any kind on, or

near, the instrument. The propellants may chemi-

cally attack the plastic.

 Soak and rinse the XR2 in fresh water at the end of each day of

diving, and check to ensure that the areas around the Depth Sen-

sor (Fig. 88a), PC Interface Data Port (Fig. 88b), and Buttons

are free of debris or obstructions.

 To dissolve salt crystals, use lukewarm water or a slightly

acidic white vinegar/water bath.

 After removal from the bath, place the unit under gently run-

ning water and towel dry before storing.

 Transport your unit cool, dry, and protected.

WARNING: Never force any object through any

slots or holes of the Housing. Doing so may dam-

age the depth sensor, possibly resulting in errone-

ous depth and/or dive time remaining displays.

Fig. 88 - Case Back