Operation Manual

Simulated Post Dive Surface Mode

 The Simulator will enter Demo Surface Mode (Fig. 87) upon as-

cending to 3 feet (1 meter) or shallower.

 Press and hold the Select (Side) button for 4 seconds to access

Time Acceleration. The small time clock icon begins flashing.

 Press and release the Select (Side) button to increase Surface In-

terval Time 1 minute per real time second.

 Press and release the Select (Side) button during the Time Ac-

celeration to restore the normal time rate of 1 second per real

second.

 Press and release the Advance (Front) button to access FO2 Set

Mode. The FO2 graphic and value previously set will appear

with the value flashing.

 Press and release the Select (Side) button to increase the FO2

value in increments of 1%.

 Press and release the Advance (Front) button to accept the set-

ting and return to Demo Surface Mode.

 Press and hold the Select (Side) button for 2 seconds to access

Dive Mode for another Demo dive. The DOWN Arrow will ap-

pear flashing.

 Pressing and holding Both buttons simultaneously for 2 seconds

will revert operation to real Surface Mode.

Fig. 87 - Demo Post Surface