Operation Manual

78
Descending
 Press and hold the Select (Side) button for 2 seconds to access
Dive Mode. The DOWN Arrow will appear flashing (Fig. 83).
 Press and release the Select (Side) button to begin a Descent at a
rate of 5 feet (1.5 meters) per real time second.
 Press and release the Select (Side) button during the Descent to
stop the Descent.
 During the Descent, pressing and releasing the Advance (Front)
button provides access to the Alternate Displays.
 Press and hold the Select (Side) button for 4 seconds to access
Time Acceleration. The small clock icon will begin flashing
(Fig. 84).
 Press and release the Select (Side) button to increase Elapsed
Dive Time 1 minute per real time second.
 Press and release the Select (Side) button during Time Accelera-
tion to restore normal time rate of one second per real second.
 To exit Simulator operation at this time, press and hold Both
buttons simultaneously for 2 seconds to revert operation to real
Surface Mode.
 To make a Simulated Ascent, first stop a Descent (if one is being
made), then continue as follows.
Fig. 83 -Demo Start Descent
Fig. 84 -Demo Time Acceleration